Friday, January 11, 2013

Issues with Tape Changer in Bacula on FreeBSD

  I have an old Dell PowerVault 124T I use for home backups. It's a bit noisy, so I have it attached to an old APC master switch so I can turn it on when I want to do a backup. The catch is that the FreeBSD server I'm using might have been rebooted while the LTO array was off. So, I use camcontrol:


sudo camcontrol devlist

turns up nothing...

sudo camcontrol rescan all

now, we have an LTO drive and a changer:


            at scbus1 target 9 lun 0 (pass0,sa0)
               at scbus1 target 9 lun 1 (pass1,ch0)

So far, so good. A restart of bacula-sd should pick up the device, if needed. 

sudo service bacula-sd restart


However, I discovered that bacula couldn't see the slots in the changer when I did an update barcode slots

So, I checked the status of the storage daemon:


3301 Issuing autochanger "loaded? drive 0" command.
3991 Bad autochanger "loaded? drive 0" command: ERR=Child exited with code 127.
Results=mtx: not found

mtx not found! It was installed from ports, so I did a simple fix of 

ln -s /usr/local/bin/mtx /usr/bin

and now the command worked:

*update barcode slots
Automatically selected Catalog: MyCatalog
Using Catalog "MyCatalog"
The defined Storage resources are:
     1: File
     2: LTO3
Select Storage resource (1-2): 2
Connecting to Storage daemon LTO3 at fbsd1:9103 ...
3306 Issuing autochanger "slots" command.
Device "Autochanger" has 8 slots.
Connecting to Storage daemon LTO3 at fbsd1:9103 ...
3306 Issuing autochanger "list" command.
Catalog record for Volume "000150L3" updated to reference slot 1.
Catalog record for Volume "000186L3" updated to reference slot 2.
Catalog record for Volume "000140L3" updated to reference slot 3.
Catalog record for Volume "000138L3" updated to reference slot 4.
Catalog record for Volume "000137L3" updated to reference slot 5.
Catalog record for Volume "000131L3" updated to reference slot 6.
Catalog record for Volume "000136L3" updated to reference slot 7.
Catalog record for Volume "000162L3" updated to reference slot 8.
*exit

No comments: